|
|
|
SH-5931 |
|
|
General Specifications |
|
| CPU Socket 478 for Intel Celeron or Pentium 4 processor |
|
| Memory Support three 168-pins DIMM sockets, up to 3GB SDRAM |
|
| HDD: Space for two IDE interface, 3.5" type | |
| SLOT:Expansion 1x ISA and 3x PCI SLOT (5 slot BP with one CPU CARD) | |
| FDD: Supports one 3.5"FDD | |
| CD ROM:Supports one slim- size CD-ROM | |
| Color : Available in black and beige. (Colors available for OEM) | |
| Touchscreen:
Resistive
(optional) Surface Hardness：3H Optical Clarity：80 % Operating Temperature：0°C ~ 50°C Endurance Test：Over 1 million strikes Operating Voltage：DC 5 ~ 12 V Resistance：200W ~ 900W Linearity：< 1.5% Faceplate Surface：Anti-glare coating Operation Pressure：35g~60g Storage Temperature：-20°C ~ 70°C Message Noise：5 m sec ~ 15 m sec Operating Current：5mA ~ 25mA Isolation Resistance：DC25V 20MW |
|
|
CPU CARD |
|
| Processor/Cache: Intel Pentium 4 processors up to up-to-date frequency with L2 cache integrated in CPU Intel Celeron processors up to up-to-date frequency with L2 cache integrated in CPU Chipset: Intel 82845 BIOS: Award 4Mbit PnP Flash BIOS EIDE: Two independent channels for a total of four IDE devices ATA-100 support Super I/O: Controller: Winbond W83627 HF Serial Port: Two asynchronous, 1 x RS-232, 1 x RS-232/422/485, 10-pin Parallel Port: One bi-directional with ECP/EPP/SPP support, 26-pin Floppy Controller: Support for two drives (1.44MB for each) Keyboard/Mouse: 6-pin Mini-DIN connector for mouse or keyboard One internal 5-pin box-header for mouse One internal 5-pin box-header for keyboard System Memory: Three 168-pin DIMM sockets support up to 3GB unbuffered ECC/non-ECC SDRAM USB: Two USB ports IrDA: One IrDA pin-header for wireless communications LAN:Supports One LAN,with 10/100BASE-T,RJ-45 output Wake On LAN support Connectors: D-type: LAN (RJ-45); PS/2 Mouse and PS/2 Keyboard SODIMM: LCD (1 x 44-pin) Pin-header: CRT (1 x 16-pin); USB (4 x 5-pin); Serial Port (2 x 10-pin); Parallel Port (1 x 26-pin);FDD (1 x 34-pin); EIDE (2 x 40-pin); PS/2 Mouse (1 x 5-pin); PS/2 Keyboard (1 x 5-pin);Power Supply (1 x 2 pin); 5Vsb ATX power connector (1 x 6-pin) Watchdog Timer: System reset or non-maskable interrupt software programmable time internal and jumper selectable (64-level) Onboard a MiniPCI socket for feature expansions SSD: Onboard DiskOnChipR socket Hardware Monitoring: Controller: Winbond W83627HF Detection of CPU temperature, CPU board temperature, Power failure and Fan failure MBTF: GEM reports at least 50,000 hours VGA INTERFACE Controller: SMI 712 with CRT/LCD Support Max. Resolution: CRT up to 1280 x 1024 @ 256 colors LCD up to 1024 x 768 @ 16 bit colors Graphic Memory: onboard 4MB SDRAM |
|
|
Power Supply |
|
| Output rating: 300 W | |
| Input voltage: 110/230 VDC @ 47/63 Hz, (PFC optional) | |
| Output voltage: +3.3V@14A,+5V@25A,+12V @ 8A,-5V@0.5A,-12V@0.5A+5VSB@2A | |
| MTBF: >80,000 hrs at 80% load, 25° C | |
| Safety: UL/CSA/TÜV/CE approved | |
|
LCD Display |
|
| Operating temperature: 0 - 50° C | |
| Viewing angle: 130° | |
| LCD MTBF: 50,000 hrs. | |
| Backlight lifetime: 50,000 hrs. | |
| Simultaneous mode: Yes | |
| Display type: 1024x768 SVGA TFT LCD | |
| Contrast Ratio: 500:1 | |
| Luminance (cd/m2): 250 nit (500/800/1000 nit optional) | |
| Pixel pitch: 0.297 x 0.297 (mm) | |
| Max. colors: 16.7M | |
|
Environmental Specifications |
|
| Operating temperature: 0 ~ 50° C (32 ~ 113° F) | |
| Front Panel protection: IP 65 at front panel | |
| Dimensions | |
| W.420mm x H.285mm x D.161.3mm(D.132mm without front panel) | |
| N.W. 8.5 KGS | |
| G.W. 10 KGS | |
| CUFT. 2.7 | |
|
Download |
|
| Touch-screen Driver ----> Download | |
| CPU Card Driver --------> | |
| CPU Specification ------> |